The surface treatment method of the kitchen stainless steel sink

December 22, 2022

At present, there are five main types of kitchen stainless steel sinks on the market, namely: scrub surface, brushed surface, pearl surface, compression surface and mirror treatment process. And these five different Stainless Steel Sink surface treatment methods have advantages and disadvantages. When buying a stainless steel sink, you can choose the most suitable Kitchen Sink according to the specific environment of the kitchen at home.

1. Faste surface
It is also called bead sand surface, which uses small sand grains to evenly smash the surface of the stainless steel sink with a small sand, so that its surface is evenly formed and its small grooves (the human eye is hard to see), and it improves the surface of the stainless steel sink surface. Hardness also improves its scratch resistance. The principle is equivalent to the spray treatment in mechanical processing. This treatment generally requires that the wall thickness of the board should not be too thin. Generally, the overall stretching stainless steel sink is more method.

2, Brushed surface
Also called silk noodles, it is to use a brushed device to repeatedly pull on the surface of the stainless steel sink (equivalent to the grinding machine processing in mechanical processing). Make it on the surface of a subtle trace, and the surface and it are smooth. The feel and visual have a strong clear harmony. Because it is directly drawn on the surface of the stainless steel sink, the requirements for the board are extremely high. Sometimes the drawing on the surface will appear small on the surface and affect the appearance.

3. Pearl surface
Some people are also called pearl silver noodles, matte noodles, pearl matte noodles, etc. It is formed by the chemical electrolyte for surface treatment (to be at the same time as plating). This surface treatment In all production, the process is the simplest, the technical content is small, and the production cost is low. The price of products made is also low. However, the biggest defect of this surface is not tolerance, the surface is easy to use scratches, and the coating will fall off seriously. Therefore, many large -scale enterprises have gradually replaced this process with other processes.

4. Pressure surface
It is pressed on the surface of the stainless steel sink to press a regular pattern or directly suppress it with compressive plate materials (equivalent to the pattern steel plate used on the road on the road), and then use the pearl surface treatment method for surface treatment. The visual effect of the compressive surface is also good, but the long -term oil fume in the kitchen will accumulate dirt in the pattern and it is difficult to clean up.

5. Mirror surface
It is repeatedly polished on the surface of the stainless steel sink, so that its surface forms a mirror -like effect. This treatment is not applicable. During use and it is easy to form scratches.
Kitchen Sink Manufacture

Author:

Mr. John

E-mail:

manager@meiaosink.com

Phone/WhatsApp:

+8613392092328